The rust resistant industrial door!

The Alucent aluminum sectional door is a rust resistant sectional door. The Alucent aluminum sectional door, equipped with 24 gauge aluminum skins, has all the features of a Thermostop industrial sectional door: high density polyurethane foam core available in 2” (R-18), 3” (R-24) and 4” (R-32) thicknesses, airtight tongue-and-groove joint, true thermal break with an integral bubble shaped weather seal, 20 gauge steel continuous reinforcement backing for the solid attachment of hinges, triple-lip perimeter weather seal with extra heavy-duty aluminum retainer, robust U-rubber bottom seal, 16 gauge galvanized steel end caps, etc. Corrosion resistant thanks to its polyester coated 24 gauge aluminum skins; the Alucent aluminum sectional door is ideal for applications such as:
  • service station
  • car wash
  • car dealership
  • hospital
  • saline environment
  • storage warehouse

Technical Specifications

Performance tests​
  • ASTM E-283 (Air Leakage): 0.645 L/s-m2 at 75 Pa (0.127 cfm/ft2 at 25 miles/hour)
  • ASTM E-547 (Water Penetration): Absolutely no leak
Size capacity
Doors up to 24′ wide by 24′ high (7315mm wide by 7315mm high)
Thickness and insulation value

3 options available:

  • 2″ (50mm): Thermostop™ Alucent, model Mark II-244
  • 3″ (75mm): Thermostop™ Alucent, model Mark III-244
  • 4″ (100mm): Thermostop™ Alucent, model Mark IV-244
Manufacturing Process
The inner core consists of rigid polyurethane, foamed in place under high pressure between two metal skins.
Joint and Seal
High quality aluminium skins roll formed into an exclusive tongue-and-groove joint with a true thermal break and a double-shaped weather seal (single bubble seal for the Mark II model).
Metal skins
24ga. (0.60mm) aluminium.
Finish

Stucco finish, with ribs.

Standard: White or grey RAL-9006.

Optional colors: Shop painted. Choice of color from the RAL color chart

White stucco finish
Grey RAL-2006
Color to be selected from the RAL color chart
Perimeter Weather Seal
3-lip, flexible PVC weather seal, retained in an extra robust extruded aluminum retainer.
Bottom Weather Seal
U-shaped, flexible PVC weather seal, retained in a heavy duty extruded aluminum retainer (one bottom seal for the Mark II model).
End Caps
Sections are equipped with 16ga. (1.42mm) thick galvanized steel end caps.
Glazing options

Type A (for the Mark II model only):
Full view extruded aluminum panel. Clear anodized finish.

Type B :
Black square frame.
Double acrylic or 1/8″ – 1/8″ sealed glass.
Standard 24″ x 12″.

Type C :
Black round corner frame.
Double acrylic glass.
Standard 24″ x 12″.

Type E :
White square frame windows.
Standard 24″ x 12″.

Type A
Type B
Type C
Type E
Hardware and electric operators
Recommended models (for 10 000 cycles springs):
  • Up to 16’0” (W.) x 16’0” (H.):Hardware model 80-T with electric motor XTRA-H
  • More than 16’0” (W.) x 16’0” (H.):Hardware model 80-THD with electric motor XTRA-HHD
Note: For more information, please consult the Hardware – Thermostop Industrial Doors and Operators – Thermostop Industrial Doors brochures.

Get in touch with our specialists

Tell us more about your project!

For your industrial door need or for any specialty door requirement, let Thermostop be your last stop. For custom quotes or to learn more about our high quality doors, please contact us with your questions or door specifications

Get in touch with our specialists

Tell us more about your project!

For your industrial door need or for any specialty door requirement, let Thermostop be your last stop. For custom quotes or to learn more about our high quality doors, please contact us with your questions or door specifications

Clients

Our industrial overhead doors are trusted by companies across North America