The most attractive heavy-duty aluminum door!

The AL-2000 aluminum panel door is a heavy-duty 2” thick door, made with extra strong tubular aluminum extrusions that are assembled by means of full length through bolts. Welding shall not be permitted in any part of the process. When required, the AL-2000 aluminum sectional door is reinforced with aluminum built-in integral fins and extra heavy-duty aluminum T-struts. Standard finish is clear anodized with optional painted option. The AL-2000 aluminum sectional door can be fully glazed with thermo glass or partially glazed with kick proof bottom panel and intermediate insulated panels. Optional performance glazing is available. The airtight AL-2000 aluminum door is outfitted with a panel joint closed-cells foam tape, a robust triple-lip perimeter weather seal and a U-rubber bottom seal. The AL-2000 aluminum sectional door is extremely robust, durable and yet pleasantly attractive. It is your definite solution for applications requiring natural daylight and clear visibility, with durability and performance as criteria of selection.

The AL-2000 aluminum sectional doors are used for applications such as :

  • Car dealership
  • Car wash
  • Farm and stable
  • Hospitals
  • Fire hall
  • Service station

Technical Specifications

Wind load design criteria
Doors to withstand a wind load of 21psf (velocity of 90.5 miles/hour) with a maximum horizontal deflection of 1/120 of opening width.
Size capacity
Doors up to 30′ wide by 24′ high (9144mm wide by 7315mm high)
Reference product

Thermostop™ AL-2000 :

  • type A1, A2, A3 or A4
  • type B1, B2, B3 or B4
Thickness
2″ (50mm) thick.
Manufacturing Process
All tubular extrusions assembled using full length through bolts. Welding is not permitted in any part of the process.
Joint and Seal
Door sections have an authentic tongue-and-groove joint. The horizontal seal between the sections are of foam rubber type.
Solid sections

Aluminum Paneled secions

Type A1, A2, A3 or A4

16ga. (1.30mm) thick aluminum panels, smooth clear anodized finish, set in U-shaped vinyl gaskets and securely retained in place with a rigid snap-on moulding.

Mark II polyurethane insulated sections

Type B1, B2, B3 or B4

16ga. (1.30mm) thick aluminum panels, smooth clear anodized finish, set in U-shaped vinyl gaskets and securely retained in place with a rigid snap-on moulding.

Glazing

Glazing sealed with watertight closed-cell foam tape and securely retained in place with a rigid vinyl snap-on moulding.

  • 1/8″ (3mm) single glass
  • 5/8″ (16mm) sealed glass
  • Tinted glass
  • Tempered glass
  • Polished wire glass
  • Low-E glass
  • SDP-16 polucarbonate
Finish
Standard
Clear anodized

Optional anodized color

Champagne
Light bronze
Dark bronze
Black
Optional painted color
Chemically treated for adherence, then painted with one coat of primer, followed by one coat of finish paint. Powder coating is also available. Color from the RAL color chart.
Reinforcement
When required, the horizontal members are adequately reinforced with integral reinforcing fins and aluminum T-struts. No steel reinforcing struts are permitted.
Aluminum T-struts
Built-in fin on a female rail
Weather seal
Plan view details
Perimeter weather seal
Bottom weather seal
Pedestrian Door (optional)
Standard 34″ (W) x 78″ (H)
Exhaust (optional)
4″ (100mm) aluminum exhaust port located at the bottom section, factory installed.
Hardware and electric operators
Recommended models for doors with 1/8” (3mm) single glass glazed sections. Up to 12’0” (W.) x 12’0” (H.): Hardware model 50-T with electric motor XTRA-LH or XTRA-LT Up to 16’0” (W.) x 16’0” (H.): Hardware model 80-T with electric motor XTRA-H Note : For more information, please consult the Hardware – Thermostop Industrial Doors and the Operators – Thermostop Industrial Doors sections.

Get in touch with our specialists

Tell us more about your project!

For your industrial door need or for any specialty door requirement, let Thermostop be your last stop. For custom quotes or to learn more about our high quality doors, please contact us with your questions or door specifications

Get in touch with our specialists

Tell us more about your project!

For your industrial door need or for any specialty door requirement, let Thermostop be your last stop. For custom quotes or to learn more about our high quality doors, please contact us with your questions or door specifications

Clients

Our industrial doors are specified and installed across North America