Your uncompromising sliding door!

The Glace-Guard™ Slider cold storage sliding door is robust and well insulated. It is available in 3″ (R-24) or 4″ (R-32) thicknesses and is made of high quality metal skins and insulated with high density polyurethane foam. The hardware consists of a heavy-duty double track system with trolley assembly roller systems. The track system is slanted from center to end(s) to ensure a tight seal and to reduce seal wear. All components are made of aluminum or galvanized steel, or are zinc-coated for food applications. The Glace-Guard™ Slider freezer door is outfitted with heat trace on its four sides to prevent ice or frost accumulation and to avoid the need for a heated threshold. All Glace-Guard™ Slider cooler / freezer doors come with a standard self- supporting extruded aluminum face frame that carries the door, hardware and motor weight. The cooler / freezer door can be operated manually or be motorized. Motor options are: 1) a high speed variable frequency soft-start soft-stop DC servo motor system 2) a mono-speed AC motor. The Glace-Guard™ Slider cooler / freezer door is your best door investment when high performance, energy conservation and low maintenance costs are criteria of selection.
  • Cold storage warehouse
  • Grocery distribution center
  • Food processing plant
  • Pharmaceutical warehouse
  • Heavy manufacturing industrie

Technical Specifications

Products
  • Glace-Guard™ Slider III (3″)
  • Glace-Guard™ Slider IV (4″)
Motor speed
(With biparting doors) 48” (1219mm) per second
Temperature range

Cooler: 4°C & above / 38°F & above

Freezer:-30°C to 2°C / -22°F to 36°F

Size

Up to 14′ 0″ W. x 16′ 0″ H. (4267mm W. x 4877mm H.)

Thickness and insulation value
  • 3” (R-24) thick: Glace-Guard™ Slider III
  • 4” (R-32) thick: Glace-Guard™ Slider IV
Panel

Single or biparting, 3″ (75mm) or 4″ (100mm) thick panels, insulated with rigid polyurethane, foamed in place under high pressure between two metal skins. Standard 26ga. steel skins, white stucco finish.

For other skins options, please consult Metal skins options presented further. The panel frame is made of U-shaped heavy-duty aluminum extrusions.

Hardware

The hardware consists of a heavy-duty double track system and trolley assembly roller systems. The trolley assembly stabilizes the movements of the panels at high speed and is equipped with solid tire rollers to support an intensive usage. The track system is slanted from center to both ends to ensure a tight seal and to reduce seal wear. All components are made of aluminum or galvanized steel, or are zinc-coated for food applications.

Heavy-duty double track system combined with trolley assembly.

Seals
High quality airtight compression seals on door frame and double bottom sweep seals.
Face frame and back frame
Standard 1” thick extruded aluminum face frame, mill finish, to self support the door and hardware load. Optional back frame made with same material as face frame.
Options

Heat trace :
For freezer applications, the door frame and panels are equipped with a heat trace to prevent ice or frost accumulation.

Glazing :
Sealed glass or acrylic glass 12″ x 24″ (305mm x 610mm) windows.
Heated sealed glass window available on request.

Kick plate :
24″ (610mm) high steel kick plate to protect the door bottom against forklift impacts.

  • 1/16” thick aluminum checker plate
  • 1/8” thick aluminum checker plate

 

Motor

DC variable frequency motor (optional):

  • Brushless servomotor
  • High speed operation: up to 48″ (1220mm) per second at opening for a bi-parting door
  • Dimensions: 11” x 41/4” x 41/4”
  • Closed loop control system to ensure accurate motion profile with changing loads
  • Selectable input voltage, single or three phase: 115, 208, 230, 460 or 575V AC
  • Programmable obstruction sensing
  • Cycle counter
  • LCD/Keypad display of system operation
  • Electronic programmable clutch
  • Electronic door lock protection
  • Corrosion-resistant
 

AC one-speed motor (optional):

  • Worm gear motor
  • 1.5 second time delay before direction reversing
  • Safety pneumatic edge
  • 12”per second on opening and closing
  • 15”cycles maximum per hour
  • Options for 115V, 230V, 460V or 600V
  • Motor size: 10”W. x 13”H. x 11”depth
DC Variable Frequency Motor
AC One Speed Motor
Metal skins options
Steel Finish
26ga. (0.41mm) stucco, white
20ga. (0.86mm) smooth, white
Aluminum Finish
24ga. (0.60mm) stucco, white or grey RAL-9006

Get in touch with our specialists

Tell us more about your project!

For your industrial door need or for any specialty door requirement, let Thermostop be your last stop. For custom quotes or to learn more about our high quality doors, please contact us with your questions or door specifications

Get in touch with our specialists

Tell us more about your project!

For your industrial door need or for any specialty door requirement, let Thermostop be your last stop. For custom quotes or to learn more about our high quality doors, please contact us with your questions or door specifications

Clients

Our industrial doors are specified and installed across North America